I thought maybe I wasnt getting good air circulation so I installed all my stuff in a server case I had sitting around its sealed loaded with fans, and good flow, and still after all that I got my temps to do to 92 C 2 to 5 degrees lower that what i was. I have a Thermaltake tower 900 case thats aircooled. I have a pretty beefy cooler, and my idle temp currently 92 C. I am running a rycpu with asus crosshair hero 6. When you google temperatures for the 1700 OC the first result is this, which at this point sounds like it's too good to be true (51C peak 1.3v) or I just got unlucky.ģ.7Ghz just seems to be the guaranteed OC for most people and I kind of doubt they do this at 80☌+ and a machine that sounds like a turbine. Load: 79°, 2596 RPM (AIDA test failed too after 5 minutes with Warning: Hardware failure detected) This is when I set my RAM to run with 2996 instead of 2133 and suddenly all my temps increased.
HWMONITOR PRO REGISTRATION KEY 1.25V PC
The temperatures on idle dropped from 32☌ to 30☌ at stock and from 36☌ to 33☌ load they dropped from 61 to 59☌ at stock and from 71 to 69☌ seem a lot better, right? Still higher than what some other people report and my PC is anything but silent with every fan running at max at this point. I did notice something weird, as I was unable to recreate the 41 ☌ on idle at first. Here are my results.Īfter this I reinstalled the cooler again and used a little less thermal paste since it seemed like I used a bit too much. After that I did the AIDA64 system stability test. I disabled everything in the startup tab in the task manager and would let the PC just sit there for a few minutes with 0% (sometimes spikes to 1%) CPU activity. I have a Nanoxia Deep Silence 3 case with 3 x 120 mm (max. At 1.25v, 65c even seems high.Īlright, I have done a bunch of testing, took me quite some time.įirst, I reset my bios settings. The case fans were always running at max. It's generally recommended not to exceed 80c during a stress test like Aida64 (stressing CPU/FPU/Cache). The stock Wraith Spire is a damn good cooler and should be able to handle 1.35v before temperatures become too high. However, coupled with your high maximum temperatures at such a low voltage, I'm wondering if the cooler was installed incorrectly, somehow.
![hwmonitor pro registration key 1.25v hwmonitor pro registration key 1.25v](http://4.bp.blogspot.com/-6tjqC3w3k9Q/VQMooWNJGuI/AAAAAAAAJpg/dWPlyv7miBo/s1600/HWMonitor-Pro_1.png)
Many complain of high idle temperatures while some background process is being an ass. What I'm aiming for is a completely idle system. Disable any unnecessary, non-Microsoft services and reboot. If that's not the problem, open msconfig (Start Menu - Run) and temporarily disable everything in startup. Ryzen Master tends to use about 10% CPU on my system preventing idle. If you're using Ryzen Master, you should close it before taking idle temperatures. Package Temperature in HWMonitor will be the line to focus on. If your system is truly idle, you should be sitting in the low-30s.